Many single-phase motors used on refrigeration systems will incorporate some type of capacitor. They will either use a start capacitor or a run capacitor. Some motors will even use both.

Single-phase motors, adjustable-speed drives (ASDs), and power factor (PF) correction applications often depend on capacitors to operate properly. This article explains how to test these critical ...

KYOCERA AVX, a leading global manufacturer of advanced electronic components engineered to accelerate technological ...

So, test the capacitors while the system is running for a more accurate reading, and it works doubly in your favor as a way to impress other technicians with your newly found math skills. Remember ...

The circuit shown here tackles ESL/ESR measurement of capacitors by using a mercury-wetted relay (Fig. 1). In this circuit, the relay is employed as a fast closing switch.

Figure 2 Prototyped circuit Figure 2 shows the circuit prototyped using copperclad scored with a hobby knife, plus whatever passives I had on hand at my bench. During proof-of-concept testing, a stand ...

[James] designed a set of circuit boards that enabled him to place different types of capacitors at various distances along a set of PCB traces.

It has been found that a simple circuit in which the alternator is replaced by a charged capacitor imposes upon the circuit breaker a test of almost equal severity to that produced by the machine.

Measurement of circuit's attenuation factor and generator's internal resistance leads to r c, the capacitor's ESR: Instead of using a sine wave excitation, we can use a square wave.

In part 1 of this series, we introduced you to three op-amp test circuits: A self-test circuit, a two-op-amp loop, and a three-op-amp loop. The circuits let you test V OS (offset voltage), CMRR ...

So, impedance analyzers are used as described below: Characterize circuit blocks: Each major circuit block’s impedance behavior when integrated is modeled based on measurements from impedance ...